Geoportal ČÚZK
Access to map products and services


Zvolte jazyk/Choose your language: Česky English


Coordinate Reference Systems

Geographical Grid Systems

Geographical Names

Administrative Units

Addresses

Cadastral Parcels

Transport Networks

Hydrography

Elevation

Land Use

Orthoimagery

Buildings

Links


INSPIRE theme Cadastral Parcels Extended (CPX)

Dataset for the theme Cadastral Parcels (CP) harmonised according to the INSPIRE Directive in an extended data model (CPX). The dataset focuses on providing full content of cadastral map of the Czech Republic using extension of CP data model according to the rules of INSPIRE technical guidance. Data is extended on easements, geodetic control points, other features of digital cadastral map. Parcels contain some additional attributes in comparision with INSPIRE dataset as for instance type of boundary, mode of land use, nature of land use, link to the building on the parcel and map symbols. Data contain also original arc geometry of parcel boundaries. Dataset is provided as Open Data (licence CC-BY 4.0). Data is based on ISKN (Information System of the Cadastre of Real Estates). In the areas with analogue map (raster form) only centroids of parcels are available. Boundaries of cadastral units are available for the whole Czech Republic. Parcels, easements, geodetic control points and other features of map from the territory where the digital map occures (to the 2021-04-26 it is 97.32% of the Czech Republic, i.e. 76 756.98km2. Data is created daily (if any change within the cadastral unit occurs). Data in the GML 3.2.1 fotrmat are valid against XML Definition Schema for the Cadastral Parcels Extended in version 4.0. Dataset is compressed (ZIP) for downloading. More in the Cadastral Act No. 256/2013 Coll., Cadastral Decree No. 357/2013 Coll., Cadastral Decree on Data Provision No. 357/2013 Coll. as amended and INSPIRE Data Specification on Cadastral Parcels v 3.0.1.



Data identification

Citation
Source name: INSPIRE theme Cadastral Parcels Extended (CPX)
Alternative name:
Reference datum
Reference date: 2021-04-30
Event: revision
Reference date: 2017-09-01
Event: creation
Data identifier
Unique identifier: CZ-00025712-CUZK_SERIES_CPX
Contact to the organisation responsible for the data
Person name:
Name of the organisation: Czech Office for Surveying, Mapping and Cadastre
Responsible organisation information
Contact phone
Phone: +420 284 044 455
Fax: +420 284 041 557
Address
Delivery place: Pod sídlištěm 1800/9
City: Praha 8
ZIP code: 182 11
Country: Czech Republic
Online source
Contact hours: Mo-Fr 7:00 AM - 5:00 PM CET
Supplementary information:
Role: custodian
Other information:
Abstract: Dataset for the theme Cadastral Parcels (CP) harmonised according to the INSPIRE Directive in an extended data model (CPX). The dataset focuses on providing full content of cadastral map of the Czech Republic using extension of CP data model according to the rules of INSPIRE technical guidance. Data is extended on easements, geodetic control points, other features of digital cadastral map. Parcels contain some additional attributes in comparision with INSPIRE dataset as for instance type of boundary, mode of land use, nature of land use, link to the building on the parcel and map symbols. Data contain also original arc geometry of parcel boundaries. Dataset is provided as Open Data (licence CC-BY 4.0). Data is based on ISKN (Information System of the Cadastre of Real Estates). In the areas with analogue map (raster form) only centroids of parcels are available. Boundaries of cadastral units are available for the whole Czech Republic. Parcels, easements, geodetic control points and other features of map from the territory where the digital map occures (to the 2021-04-26 it is 97.32% of the Czech Republic, i.e. 76 756.98km2. Data is created daily (if any change within the cadastral unit occurs). Data in the GML 3.2.1 fotrmat are valid against XML Definition Schema for the Cadastral Parcels Extended in version 4.0. Dataset is compressed (ZIP) for downloading. More in the Cadastral Act No. 256/2013 Coll., Cadastral Decree No. 357/2013 Coll., Cadastral Decree on Data Provision No. 357/2013 Coll. as amended and INSPIRE Data Specification on Cadastral Parcels v 3.0.1.
Purpose: Implementation Act No. 344/1998 Coll. on cadaster of real estates (http://portal.gov.cz/app/zakony/zakonPar.jsp?idBiblio=40068&fulltext=&nr=344~2F1992&part=&name=&rpp=15#local-content) and transposition of INSPIRE Directive into Czech legislation by the novel of Act No. 123/1998 Coll., on right to information on the environment (http://portal.gov.cz/app/zakony/zakonStruct.jsp?idBiblio=46636&fulltext=&nr=123~2F1998&part=&name=&rpp=15#local-content).
Responsible organisation
Person name:
Name of the organisation: Czech Office for Surveying, Mapping and Cadastre
Responsible organisation information
Contact phone
Phone: +420 284 044 455
Fax: +420 284 041 557
Address
Delivery place: Pod sídlištěm 1800/9
City: Praha 8
ZIP code: 182 11
Country: Czech Republic
Online source
Contact hours: Mo-Fr 7:00 AM - 5:00 PM CET
Supplementary information:
Role: custodian
Maintenance info
Maintenance and update frequency: continual
Date of planned source revision:
Maintenance note: Pre-defined datasets are generated daily. Data purchased by WFS service are updated in hours.
Keywords
Officially registered thesaurus
Reference datum
Reference date: 2008-06-01
Event: publication
Organisation responsible for the thesaurus:
Name of the organisation: Joint Research Centre
Role: pointOfContact
Keywords
Keyword: cadastral parcel
Keyword: other features
Keyword: inner drawing
Keyword: planimetry supplement
Keyword: other buildings
Keyword: protected zone
Keyword: arc geometry
Keyword: original geometry
Officially registered thesaurus
Reference datumOrganisation responsible for the thesaurus:
Role:
Keywords
Keyword: National
Officially registered thesaurus
Reference datum
Reference date: 2019-05-22
Event: publication
Organisation responsible for the thesaurus:
Name of the organisation: Joint Research Centre
Role: pointOfContact
Source restriction
Access and use terms: Public access is not rescticted and is provided in accordance with Decree No. 359/2011 Coll., on the register of territorial identification, addresses and real estates and law 123/1998 Sb., on the right to information about the environment.
Data registered in the National Open Data Catalogue: Yes
Type of spatial representation: vector
Spatial resolution
Correspondent scale
Scale factor: 1000
Source language: cze
Character set: utf8
Thematic category: planningCadastre
Data extension
Extent information: 100% area of the Czech Republic, i.e. 78 870 km2 (to 31st December 2016)
Geographic limitations
Minimal bounding box
Westernmost coordinate: 12.09
Easternmost coordinate: 18.86
Southernmost coordinate: 48.55
Northernmost coordinate: 51.06
Time extent -
Altitude extension
Minimal value:
Maximal value:
Vertical datum:

Reference system (horizontal, vertical or temporal)

Coordinate reference system identifier
Reference system citation
Source name: ETRS89
Alternative name: ETRS89-GRS80
Reference date
Reference date: 2009-03-01
Event: revision
Coordinate reference system identifier
Reference system citation
Source name: S-JTSK / Krovak East North
Alternative name: S-JTSK / Krovak EN
Reference date
Reference date: 2011-05-09
Event: revision

Distribution

Distribution formate
Name: GML
Version:
Specification: National extension of D2.8.I.6 Data Specification on Cadastral Parcels – Technical Guidelines
Distributor
Contact information:
Name of the organisation: Czech Office for Surveying, Mapping and Cadastre
Responsible organisation information
Contact phone
Phone: +420 284 044 455
Fax: +420 284 041 557
Address
Delivery place: Pod sídlištěm 1800/9
City: Praha 8
ZIP code: 182 11
Country: Czech Republic
Online source
Contact hours: Mo-Fr 7:00 AM - 5:00 PM CET
Supplementary information:
Role: distributor
Means of order
Charges: No fees
Ordering instruction:

Data quality

Level of scope
Quality description level: series
Report - INSPIRE compliance
Test identifier: CZ-00025712-CUZK_SERIES_CPX-DQ_DomainConsistency-1
Conformity
Specification
Alternative name: COMMISSION REGULATION (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
Reference date
Reference date: 2010-12-08
Event: publication
Test description: Data set series conformity testing with INSPIRE implementing rules for spatial data sets and services interoperability.
Degree of conformity: true
Report - INSPIRE compliance
Test identifier: CZ-00025712-CUZK_CPX-DQ_DomainConsistency-2
Conformity
Specification
Name: INSPIRE data specification on theme Cadastral parcels version 3.0.1.
Alternative name:
Reference date
Reference date: 2010-04-26
Event: publication
Test description: CP data set series conformity testing with INSPIRE data specification on Cadastral Parcels by the validity check against the XML schema definition for the INSPIRE theme Cadastral Parcels in the version 4.0.
Degree of conformity: true
Report - INSPIRE compliance
Test identifier: CZ-00025712-CUZK_CPX-DQ_DomainConsistency-3
Conformity
Specification
Name: ELF Data Specification for topographic and administrative reference data at all levels of detail – v. 1.0
Alternative name:
Reference date
Reference date: 2016-03-24
Event: publication
Test description: CP data set series conformity testing with ELF data specification in the version 1.0.
Degree of conformity: true
Data origin
Data origin information: The cadastral map in the form of digital or digitized map was created at the renovation of the cadastre by new mapping or revision of analogue maps or it is a result of tranformation of digital representation of analogue map in S-JTSK datum to digital form. Rest of the area is covered by analogue map. The cadastral map is maintained (updated) continuously. Shapes of all cadastral zonings are already digitized. Cadastral parcels and their boundaries are published only for the territories where a digital map exists. In the territories without digital or digitized map, cadastral parcels are published with reference point instead of polygon. It also does not contain graphical map features, such as symbols or arrows. No cadastral districts or parcels overlaps. National cadastral reference is created by the number of cadastral unit, dash and number of the parcel including both parts. In cadastral units where the parcels of land and building parcels are numbered in two rows, for the building parcels "st. " is added to be possible to distinguish them from parcels of land. The number of cadastral unit and parcel is provided separately in the Czech legislative, i.e. not with a dash as in the national cadastral reference. Historic data are not included in this product, but it contains easements, geodetic points, other features and original geometry segments.